Monday, 11 January 2016

WEB-DESIGN

UNIT-1
HTML – OVERVIEW
HTML stands for Hypertext Markup Language, and it is the most widely used language to write Web Pages.
Hypertext refers to the way in which Web pages (HTML documents) are linked together. Thus, the link available on a webpage is called Hypertext.
 As its name suggests, HTML is a Markup Language which means you use HTML to simply "mark-up" a text document with tags that tell a Web browser how to structure it to display.
Originally, HTML was developed with the intent of defining the structure of documents like headings, paragraphs, lists, and so forth to facilitate the sharing of scientific information between researchers.
Now, HTML is being widely used to format web pages with the help of different tags available in HTML language.
Basic HTML Document
In its simplest form, following is an example of an HTML document:
<!DOCTYPE html>
<html>
<head>
<title>This is document title</title>
</head>
<body>
<h1>This is a heading</h1>
<p>Document content goes here.....</p>
</body>
</html>
Either you can use Try it option available at the top right corner of the code box to check the result of this HTML code, or let's save it in an HTML file test.htm using your favorite text editor. Finally open it using a web browser like Internet Explorer or Google Chrome, or Firefox etc. It must show the following


 output:

HTML Tags

 HTML is a markup language and makes use of various tags to format the content. These tags are enclosed within angle braces <Tag Name>. Except few tags, most of the tags have their corresponding closing tags. For example, <html> has its closing tag</html> and <body> tag has its closing tag </body> tag etc.
Above example of HTML document uses the following tags: Tag
Description
<!DOCTYPE...>
This tag defines the document type and HTML version.
<html>
This tag encloses the complete HTML document and mainly comprises of document header which is represented by <head>...</head> and document body which is represented by <body>...</body> tags.
<head>
This tag represents the document's header which can keep other HTML tags like <title>, <link> etc.
<title>
The <title> tag is used inside the <head> tag to mention the document title.
<body>
This tag represents the document's body which keeps other HTML tags like <h1>, <div>, <p> etc.
<h1>
This tag represents the heading.
<p>
This tag represents a paragraph.

HTML Document Structure

A typical HTML document will have the following structure:
Document declaration tag
<html>
<head>
Document header related tags
</head>
<body>
Document body related tags
</body>
</html>

The <!DOCTYPE> Declaration

The <!DOCTYPE> declaration tag is used by the web browser to understand the version of the HTML used in the document. Current version of HTML is 5 and it makes use of the following declaration:
<!DOCTYPE html>
There are many other declaration types which can be used in HTML document depending on what version of HTML is being used.






HTML – BASIC TAGS

Heading Tags
Any document starts with a heading. You can use different sizes for your headings. HTML also has six levels of headings, which use the elements <h1>, <h2>, <h3>, <h4>, <h5>, and <h6>. While displaying any heading, browser adds one line before and one line after that heading.
Example
<!DOCTYPE html>
<html>
<head>
<title>Heading Example</title>
</head>
<body>
<h1>This is heading 1</h1>
<h2>This is heading 2</h2>
<h3>This is heading 3</h3>
<h4>This is heading 4</h4>
<h5>This is heading 5</h5>
<h6>This is heading 6</h6>
</body>
</html>
This will produce the following result:

Paragraph Tag

The <p> tag offers a way to structure your text into different paragraphs. Each paragraph of text should go in between an opening <p> and a closing </p> tag as shown below in the example:
Example
<!DOCTYPE html>
<html>
<head>
<title>Paragraph Example</title>
</head>
<body>
<p>Here is a first paragraph of text.</p>
<p>Here is a second paragraph of text.</p>
<p>Here is a third paragraph of text.</p>
</body>
</html>
This will produce the following result:
Here is a first paragraph of text.
Here is a second paragraph of text.
Here is a third paragraph of text.

Line Break Tag

Whenever you use the <br /> element, anything following it starts from the next line. This tag is an example of an empty element, where you do not need opening and closing tags, as there is nothing to go in between them.
The <br /> tag has a space between the characters br and the forward slash. If you omit this space, older browsers will have trouble rendering the line break, while if you miss the forward slash character and just use <br> it is not valid in XHTML.
Example
<!DOCTYPE html>
<html>
<head>
<title>Line Break Example</title>
</head>
<body>
<p>Hello<br />
You delivered your assignment on time.<br />
Thanks<br />
Mahnaz</p>
</body>
</html>
This will produce the following result:
Hello You delivered your assignment on time. Thanks Mahnaz

Centering Content

You can use <center> tag to put any content in the center of the page or any table cell.
Example
<!DOCTYPE html>
<html>
<head>
<title>Centring Content Example</title>
</head>
<body>
<p>This text is not in the center.</p>
<center>
<p>This text is in the center.</p>
</center>
</body>
</html>
This will produce the following result:
This text is not in the center.
This text is in the center.

Horizontal Lines

Horizontal lines are used to visually break-up sections of a document. The <hr> tag creates a line from the current position in the document to the right margin and breaks the line accordingly.
For example, you may want to give a line between two paragraphs as in the given example below:
Example
<!DOCTYPE html>
<html>
<head>
<title>Horizontal Line Example</title>
</head>
<body>
<p>This is paragraph one and should be on top</p>
<hr />
<p>This is paragraph two and should be at bottom</p>
</body>
</html>
This will produce the following result:
This is paragraph one and should be on top
This is paragraph two and should be at bottom
Again <hr /> tag is an example of the empty element, where you do not need opening and closing tags, as there is nothing to go in between them.
The <hr /> element has a space between the characters hr and the forward slash. If you omit this space, older browsers will have trouble rendering the horizontal line, while if you miss the forward slash character and just use <hr> it is not valid in XHTML

Preserve Formatting

Sometimes, you want your text to follow the exact format of how it is written in the HTML document. In these cases, you can use the preformatted tag <pre>.
Any text between the opening <pre> tag and the closing </pre> tag will preserve the formatting of the source document.
Example
<!DOCTYPE html>
<html>
<head> <title>Preserve Formatting Example</title>
</head>
<body>
<pre>
function testFunction( strText ){
alert (strText)
}
</pre>
</body>
</html>
This will produce the following result:
function testFunction( strText ){
alert (strText)
}
Try using the same code without keeping it inside <pre>...</pre> tags


Non-Breaking Spaces

Suppose you want to use the phrase "12 Angry Men." Here, you would not want a browser to split the "12, Angry" and "Men" across two lines:
An example of this technique appears in the movie "12 Angry Men."
In cases, where you do not want the client browser to break text, you should use a nonbreaking space entity &nbsp; instead of a normal space. For example, when coding the "12 Angry Men" in a paragraph, you should use something similar to the following code:
Example
<!DOCTYPE html>
<html>
<head>
<title>Nonbreaking Spaces Example</title>
</head>
<body>
<p>An example of this technique appears in the movie "12&nbsp;Angry&nbsp;Men."</p>
</body>
</html>

HTML – ELEMENTS

An HTML element is defined by a starting tag. If the element contains other content, it ends with a closing tag, where the element name is preceded by a forward slash as shown below with few tags: Start Tag
Content
End Tag
<p>
This is paragraph content.
</p>
<h1>
This is heading content.
</h1>
<div>
This is division content.
</div>
<br />

So here <p>....</p> is an HTML element, <h1>...</h1> is another HTML element. There are some HTML elements which don't need to be closed, such as <img.../>, <hr /> and <br /> elements. These are known as void elements.
HTML documents consists of a tree of these elements and they specify how HTML documents should be built, and what kind of content should be placed in what part of an HTML document.
HTML Tag vs. Element
An HTML element is defined by a starting tag. If the element contains other content, it ends with a closing tag.
For example, <p> is starting tag of a paragraph and </p> is closing tag of the same paragraph but <p>This is paragraph</p> is a paragraph element.

Nested HTML Elements
It is very much allowed to keep one HTML element inside another HTML element:
Example
<!DOCTYPE html>
<html>
<head> <title>Nested Elements Example</title>
</head>
<body>
<h1>This is <i>italic</i> heading</h1>
<p>This is <u>underlined</u> paragraph</p>
</body>
</html>
This will display the following result:
This is italic heading
This is underlined paragraph

HTML – ATTRIBUTES

We have seen few HTML tags and their usage like heading tags <h1>, <h2>, paragraph tag <p> and other tags. We used them so far in their simplest form, but most of the HTML tags can also have attributes, which are extra bits of information.
An attribute is used to define the characteristics of an HTML element and is placed inside the element's opening tag. All attributes are made up of two parts: a name and a value:
 The name is the property you want to set. For example, the paragraph <p> element in the example carries an attribute whose name is align, which you can use to indicate the alignment of paragraph on the page.

 The value is what you want the value of the property to be set and always put within quotations. The below example shows three possible values of align attribute: left, center and right.

Attribute names and attribute values are case-insensitive. However, the World Wide Web Consortium (W3C) recommends lowercase attributes/attribute values in their HTML 4 recommendation.
Example
<!DOCTYPE html>
<html>
<head>
<title>Align Attribute Example</title>
</head>
<body>
<p align="left">This is left aligned</p>
<p align="center">This is center aligned</p>
<p align="right">This is right aligned</p>
</body>
</html>
This will display the following result:
This is left aligned
This is center aligned
This is right aligned
Core Attributes

The four core attributes that can be used on the majority of HTML elements (although not all) are:
 Id
 Title
 Class
 Style

The Id Attribute

The id attribute of an HTML tag can be used to uniquely identify any element within an HTML page. There are two primary reasons that you might want to use an id attribute on an element:
 If an element carries an id attribute as a unique identifier, it is possible to identify just that element and its content.

 If you have two elements of the same name within a Web page (or style sheet), you can use the id attribute to distinguish between elements that have the same name.

We will discuss style sheet in separate tutorial. For now, let's use the id attribute to distinguish between two paragraph elements as shown below.
Example
<p id="html">This para explains what is HTML</p>
<p id="css">This para explains what is Cascading Style Sheet</p>

The title Attribute

The title attribute gives a suggested title for the element. They syntax for the title attribute is similar as explained for id attribute:
The behavior of this attribute will depend upon the element that carries it, although it is often displayed as a tooltip when cursor comes over the element or while the element is loading.

Example
<!DOCTYPE html>
<html>
<head>
<title>The title Attribute Example</title>
</head>
<body>
<h3 title="Hello HTML!">Titled Heading Tag Example</h3>
</body>
</html>
This will produce the following result:
Titled Heading Tag Example
Now try to bring your cursor over "Titled Heading Tag Example" and you will see that whatever title you used in your code is coming out as a tooltip of the cursor.

The class Attribute

The class attribute is used to associate an element with a style sheet, and specifies the class of element. You will learn more about the use of the class attribute when you will learn Cascading Style Sheet (CSS). So for now you can avoid it.
The value of the attribute may also be a space-separated list of class names. For example:
class="className1 className2 className3"

The style Attribute

The style attribute allows you to specify Cascading Style Sheet (CSS) rules within the element.
<!DOCTYPE html>
<html>
<head>
<title>The style Attribute</title>
</head>
<body>
<p style="font-family:arial; color:#FF0000;">Some text...</p>
</body>
</html>
This will produce the following result:
Some text...
At this point of time, we are not learning CSS, so just let's proceed without bothering much about CSS. Here, you need to understand what are HTML attributes and how they can be used while formatting content.

Internationalization Attributes

There are three internationalization attributes, which are available for most (although not all) XHTML elements
   dir
 lang
 xml:lang

The dir Attribute
The dir attribute allows you to indicate to the browser about the direction in which the text should flow. The dir attribute can take one of two values, as you can see in the table that follows:
Value
Meaning
ltr
Left to right (the default value)
rtl
Right to left (for languages such as Hebrew or Arabic that are read right to left)


Example
<!DOCTYPE html>
<html dir="rtl">
<head>
<title>Display Directions</title>
</head>
<body>
This is how IE 5 renders right-to-left directed text.
</body>
</html>
This will produce the following result:
This is how IE 5 renders right-to-left directed text.
When dir attribute is used within the <html> tag, it determines how text will be presented within the entire document. When used within another tag, it controls the text's direction for just the content of that tag.

The lang Attribute

The lang attribute allows you to indicate the main language used in a document, but this attribute was kept in HTML only for backwards compatibility with earlier versions of HTML. This attribute has been replaced by the xml:lang attribute in new XHTML documents.
The values of the lang attribute are ISO-639 standard two-character language codes. Check HTML Language Codes: ISO 639 for a complete list of language codes.

Example
<!DOCTYPE html>
<html lang="en">
<head>
<title>English Language Page</title>
</head>
<body>
This page is using English Language
</body>
</html>





The xml:lang Attribute

The xml:lang attribute is the XHTML replacement for the lang attribute. The value of thexml:lang attribute should be an ISO-639 country code as mentioned in previous section.

Generic Attributes
Here's a table of some other attributes that are readily usable with many of the HTML tags.
Attribute
Options
Function
align
right, left, center
Horizontally aligns tags
valign
top, middle, bottom
Vertically aligns tags within an HTML element.
bgcolor
numeric, hexidecimal, RGB values
Places a background color behind an element
background
URL
Places a background image behind an element
id
User Defined
Names an element for use with Cascading Style Sheets.
class
User Defined
Classifies an element for use with Cascading Style Sheets.
width
Numeric Value
Specifies the width of tables, images, or table cells.
height
Numeric Value
Specifies the height of tables, images, or table cells.
title
User Defined
"Pop-up" title of the elements.

We will see related examples as we will proceed to study other HTML tags. For a complete list of HTML Tags and related attributes please check reference to HTML Tags List.

HTML – FORMATTING
If you use a word processor, you must be familiar with the ability to make text bold, italicized, or underlined; these are just three of the ten options available to indicate how text can appear in HTML and XHTML.

Bold Text
Anything that appears within <b>...</b> element, is displayed in bold as shown below:
Example
<!DOCTYPE html>
<html>
<head>
<title>Bold Text Example</title>
</head>
<body>
<p>The following word uses a <b>bold</b> typeface.</p>
</body>
</html>
This will produce the following result:
The following word uses a bold typeface.

Italic Text
Anything that appears within <i>...</i> element is displayed in italicized as shown below:
Example
<!DOCTYPE html>
<html>
<head>
<title>Italic Text Example</title>
</head>
<body>
<p>The following word uses a <i>italicized</i> typeface.</p>
</body>
</html>

This will produce the following result:
The following word uses an italicized typeface.
Underlined Text
Anything that appears within <u>...</u> element, is displayed with underline as shown below:
Example
<!DOCTYPE html>
<html>
<head>
<title>Underlined Text Example</title>
</head>
<body>
<p>The following word uses a <u>underlined</u> typeface.</p>
</body>
</html>
This will produce the following result:
The following word uses an underlined typeface.

Strike Text
Anything that appears within <strike>...</strike> element is displayed with strikethrough, which is a thin line through the text as shown below:
Example
<!DOCTYPE html>
<html>
<head>
<title>Strike Text Example</title>
</head>
<body>
<p>The following word uses a <strike>strikethrough</strike> typeface.</p>
</body>
</html>
This will produce the following result:
The following word uses a strikethrough typeface.
Monospaced Font
The content of a <tt>...</tt> element is written in monospaced font. Most of the fonts are known as variable-width fonts because different letters are of different widths (for example, the letter 'm' is wider than the letter 'i'). In a monospaced font, however, each letter has the same width.
Example
<!DOCTYPE html>
<html>
<head>
<title>Monospaced Font Example</title>
</head>
<body>
<p>The following word uses a <tt>monospaced</tt> typeface.</p>
</body>
</html>
This will produce the following result:
The following word uses a monospaced typeface.
Superscript Text
The content of a <sup>...</sup> element is written in superscript; the font size used is the same size as the characters surrounding it but is displayed half a character's height above the other characters.
Example
<!DOCTYPE html>
<html>
<head>
<title>Superscript Text Example</title>
</head>
<body>
<p>The following word uses a <sup>superscript</sup> typeface.</p>
</body>
</html>
This will produce the following result:
The following word uses a superscript typeface.
Subscript Text
The content of a <sub>...</sub> element is written in subscript; the font size used is the same as the characters surrounding it, but is displayed half a character's height beneath the other characters.
Example
<!DOCTYPE html>
<html>
<head>
<title>Subscript Text Example</title>
</head>
<body>
<p>The following word uses a <sub>subscript</sub> typeface.</p>
</body>
</html>
This will produce the following result:
The following word uses a subscript typeface.
Inserted Text
Anything that appears within <ins>...</ins> element is displayed as inserted text.
Example
<!DOCTYPE html>
<html>
<head>
<title>Inserted Text Example</title>
</head>
<body>
<p>I want to drink <del>cola</del> <ins>wine</ins></p>
</body
</html>
This will produce the following result:
Deleted Text
Anything that appears within <del>...</del> element, is displayed as deleted text.
Example
<!DOCTYPE html>
<html>
<head>
<title>Deleted Text Example</title>
</head>
<body>
<p>I want to drink <del>cola</del> <ins>wine</ins></p>
</body>
</html>
This will produce the following result:
Larger Text
The content of the <big>...</big> element is displayed one font size larger than the rest of the text surrounding it as shown below:
Example
<!DOCTYPE html>
<html>
<head>
<title>Larger Text Example</title>
</head>
<body>
<p>The following word uses a <big>big</big> typeface.</p>
</body>
</html>
This will produce the following result:
The following word uses a big typeface.

Smaller Text
The content of the <small>...</small> element is displayed one font size smaller than the rest of the text surrounding it as shown below:
Example
<!DOCTYPE html>
<html>
<head>
<title>Smaller Text Example</title>
</head>
<body>
<p>The following word uses a <small>small</small> typeface.</p>
</body>
</html>
This will produce the following result:
The following word uses a small typeface.

Grouping Content
The <div> and <span> elements allow you to group together several elements to create sections or subsections of a page.
For example, you might want to put all of the footnotes on a page within a <div> element to indicate that all of the elements within that <div> element relate to the footnotes. You might then attach a style to this <div> element so that they appear using a special set of style rules.
Example
<!DOCTYPE html>
<html>
<head>
<title>Div Tag Example</title>
</head>
<body>
<div id="menu" align="middle" >
<a href="/index.htm">HOME</a> |
<a href="/about/contact_us.htm">CONTACT</a> |
<a href="/about/index.htm">ABOUT</a>
</div>
<div id="content" align="left" bgcolor="white">
<h5>Content Articles</h5>
<p>Actual content goes here.....</p>
</div>
</body>
</html>
This will produce the following result:

HOME | CONTACT | ABOUT
CONTENT ARTICLES
Actual content goes here.....

The <span> element, on the other hand, can be used to group inline elements only. So, if you have a part of a sentence or paragraph which you want to group together, you could use the <span> element as follows

Example
<!DOCTYPE html>
<html>
<head>
<title>Span Tag Example</title>
</head>
<body>
<p>This is the example of <span style="color:green">span tag</span> and the <span style="color:red">div tag</span> alongwith CSS</p>
</body>
</html>
This will produce the following result:
This is the example of span tag and the div tag along with CSS
These tags are commonly used with CSS to allow you to attach a style to a section of a page.
HTML – COMMENTS
Comment is a piece of code which is ignored by any web browser. It is a good practice to add comments into your HTML code, especially in complex documents, to indicate sections of a document, and any other notes to anyone looking at the code. Comments help you and others understand your code and increases code readability.
HTML comments are placed in between <!-- ... --> tags. So, any content placed with-in <!-- ... --> tags will be treated as comment and will be completely ignored by the browser.
Example
<!DOCTYPE html>
<html>
<head> <!-- Document Header Starts -->
<title>This is document title</title>
</head> <!-- Document Header Ends -->
<body>
<p>Document content goes here.....</p>
</body>
</html>
This will produce result without displaying the content given as a part of comments:
Document content goes here.....

Valid vs Invalid Comments
Comments do not nest which means a comment cannot be put inside another comment. Second the double-dash sequence "--" may not appear inside a comment except as part of the closing --> tag. You must also make sure that there are no spaces in the start-of-comment string.
Example
Here, the given comment is a valid comment and will be wiped off by the browser.
<!DOCTYPE html>
<html>
<head>
<title>Valid Comment Example</title>
</head>
<body>
<!-- This is valid comment -->
<p>Document content goes here.....</p>
</body>
</html>
But, following line is not a valid comment and will be displayed by the browser. This is because there is a space between the left angle bracket and the exclamation mark.
<!DOCTYPE html>
<html>
<head>
<title>Invalid Comment Example</title>
</head>
<body>
< !-- This is not a valid comment -->
<p>Document content goes here.....</p>
</body>
</html>
This will produce the following result:
< !-- This is not a valid comment -->
Document content goes here.....

Multiline Comments
So far we have seen single line comments, but HTML supports multi-line comments as well.
You can comment multiple lines by the special beginning tag <!-- and ending tag --> placed before the first line and end of the last line as shown in the given example below.
Example
<!DOCTYPE html><html>
<head>
<title>Multiline Comments</title>
</head>
<body>
<!--
This is a multiline comment and it can
span through as many as lines you like. -->
<p>Document content goes here.....</p>
</body>
</html>
This will produce the following result:
Document content goes here.....

Conditional Comments
Conditional comments only work in Internet Explorer (IE) on Windows but they are ignored by other browsers. They are supported from Explorer 5 onwards, and you can use them to give conditional instructions to different versions of IE.
Example
<!DOCTYPE html><html>
<head>
<title>Conditional Comments</title>
<!--[if IE 6]>
Special instructions for IE 6 here
<![endif]-->
</head>
<body>
<p>Document content goes here.....</p>
</body>
</html>
You will come across a situation where you will need to apply a different style sheet based on different versions of Internet Explorer, in such situation conditional comments will be helpful.

Using Comment Tag
There are few browsers that support <comment> tag to comment a part of HTML code.
Example
<!DOCTYPE html><html>
<head>
<title>Using Comment Tag</title>
</head>
<body>
<p>This is <comment>not</comment> Internet Explorer.</p>
</body>
</html>
If you are using IE, then it will produce following result:
This is Internet Explorer.
But if you are not using IE, then it will produce following result:
This is Internet Explorer.

Commenting Script Code
Though you will learn JavaScript with HTML, in a separate tutorial, but here you must make a note that if you are using Java Script or VB Script in your HTML code then it is recommended to put that script code inside proper HTML comments so that old browsers can work properly.
Example
<!DOCTYPE html><html>
<head>
<title>Commenting Script Code</title>
<script>
<!--
document.write("Hello World!")
//-->
</script>
</head>
<body>
<p>Hello , World!</p>
</body>
</html>
This will produce the following result:
Hello World!
Hello , World!


Commenting Style Sheets
Though you will learn using style sheets with HTML in a separate tutorial, but here you must make a note that if you are using Cascading Style Sheet (CSS) in your HTML code then it is recommended to put that style sheet code inside proper HTML comments so that old browsers can work properly.
Example
<!DOCTYPE html><html>
<head>
<title>Commenting Style Sheets</title>
<style>
<!--
.example {
border:1px solid #4a7d49;
}
//-->
</style>
</head>
<body>
<div class="example">Hello , World!</div>
</body>
</html>
This will produce the following result:
Hello, World!

HTML – IMAGES
Images are very important to beautify as well as to depict many complex concepts in simple way on your web page. This tutorial will take you through simple steps to use images in your web pages.

Insert Image
You can insert any image in your web page by using <img> tag. Following is the simple syntax to use this tag.
<img src="Image URL" ... attributes-list/>
The <img> tag is an empty tag, which means that, it can contain only list of attributes and it has no closing tag.
Example
To try following example, let's keep our HTML file test.htm and image file test.png in the same directory:
<!DOCTYPE html>
<html>
<head>
<title>Using Image in Webpage</title>
</head>
<body>
<p>Simple Image Insert</p>
<img src="test.png" alt="Test Image" />
</body>
</html>
This will produce the following result:
Simple Image Insert
You can use PNG, JPEG or GIF image file based on your comfort but make sure you specify correct image file name in src attribute. Image name is always case sensitive. The alt attribute is a mandatory attribute which specifies an alternate text for an image, if the image cannot be displayed.

Set Image Location
Usually we keep all the images in a separate directory. So let's keep HTML file test.htm in our home directory and create a subdirectory images inside the home directory where we will keep our image test.png.
Example
Assuming our image location is "image/test.png", try the following example:
<!DOCTYPE html>
<html>
<head>
<title>Using Image in Webpage</title>
</head>
<body>
<p>Simple Image Insert</p>
<img src="images/test.png" alt="Test Image" />
</body>
</html>
This will produce the following result:
Simple Image Insert


Set Image Width/Height
You can set image width and height based on your requirement using width and height attributes. You can specify width and height of the image in terms of either pixels or percentage of its actual size.
Example
<!DOCTYPE html>
<html>
<head>
<title>Set Image Width and Height</title>
</head>
<body>
<p>Setting image width and height</p>
<img src="test.png" alt="Test Image" width="150" height="100"/>
</body>
</html>
This will produce the following result:
Setting image width and height

Set Image Border
By default, image will have a border around it, you can specify border thickness in terms of pixels using border attribute. A thickness of 0 means, no border around the picture.
Example
<!DOCTYPE html>
<html>
<head>
<title>Set Image Border</title>
</head>
<body>
<p>Setting image Border</p>
<img src="test.png" alt="Test Image" border="3"/>
</body>
</html>
This will produce the following result:
Setting image Border
Set Image Alignment
By default, image will align at the left side of the page, but you can use align attribute to set it in the center or right.
Example
<!DOCTYPE html>
<html>
<head>
<title>Set Image Alignment</title>
</head>
<body>
<p>Setting image Alignment</p>
<img src="test.png" alt="Test Image" border="3" align="right"/>
</body>
</html>
This will produce the following result:
Setting image Alignment

HTML – TABLES
The HTML tables allow web authors to arrange data like text, images, links, other tables, etc. into rows and columns of cells.
The HTML tables are created using the <table> tag in which the <tr> tag is used to create table rows and <td> tag is used to create data cells.

Example
<!DOCTYPE html>
<html>
<head>
<title>HTML Tables</title>
</head>
<body>
<table border="1">
<tr>
<td>Row 1, Column 1</td>
<td>Row 1, Column 2</td>
</tr>
<tr>
<td>Row 2, Column 1</td>
<td>Row 2, Column 2</td>
</tr>
</table>
</body>
</html>
This will produce the following result:

Row 1, Column 1
Row 1, Column 2
Row 2, Column 1
Row 2, Column 2

Here, the border is an attribute of <table> tag and it is used to put a border across all the cells. If you do not need a border, then you can use border="0".

Table Heading
Table heading can be defined using <th> tag. This tag will be put to replace <td> tag, which is used to represent actual data cell. Normally you will put your top row as table heading as shown below, otherwise you can use <th> element in any row.
Example
<!DOCTYPE html>
<html>
<head>
<title>HTML Table Header</title>
</head>
<body>
<table border="1">
<tr>
<th>Name</th>
<th>Salary</th>
</tr>
<tr>
<td>Ramesh Raman</td>
<td>5000</td>
</tr>
<tr>
<td>Shabbir Hussein</td>
<td>7000</td>
</tr>
</table>
</body>
</html>
This will produce the following result:
Name
Salary
Ramesh Raman
5000
Shabbir Hussein
7000
Cellpadding and Cellspacing Attributes
There are two attributes called cellpadding and cellspacing which you will use to adjust the white space in your table cells. The cellspacing attribute defines the width of the border, while cellpadding represents the distance between cell borders and the content within a cell.
Example
<!DOCTYPE html>
<html>
<head>
<title>HTML Table Cellpadding</title>
</head>
<body>
<table border="1" cellpadding="5" cellspacing="5">
<tr>
<th>Name</th>
<th>Salary</th>
</tr>
<tr>
<td>Ramesh Raman</td>
<td>5000</td>
</tr>
<tr>
<td>Shabbir Hussein</td>
<td>7000</td>
</tr>
</table>
</body>
</html>
This will produce the following result:
Name
Salary
Ramesh Raman
5000
Shabbir Hussein
7000
Colspan and Rowspan Attributes
You will use colspan attribute if you want to merge two or more columns into a single column. Similar way you will use rowspan if you want to merge two or more rows.
Example
<!DOCTYPE html>
<html>
<head>
<title>HTML Table Colspan/Rowspan</title>
</head>
<body>
<table border="1">
<tr>
<th>Column 1</th>
<th>Column 2</th>
<th>Column 3</th>
</tr>
<tr><td rowspan="2">Row 1 Cell 1</td><td>Row 1 Cell 2</td><td>Row 1 Cell 3</td></tr>
<tr><td>Row 2 Cell 2</td><td>Row 2 Cell 3</td></tr>
<tr><td colspan="3">Row 3 Cell 1</td></tr>
</table>
</body>
</html>
This will produce the following result:
Column 1
Column 2
Column 3
Row 1 Cell 1
Row 1 Cell 2
Row 1 Cell 3
Row 2 Cell 2
Row 2 Cell 3
Row 3 Cell 1










Tables Backgrounds
You can set table background using one of the following two ways:
bgcolor attribute - You can set background color for whole table or just for one cell.
background attribute - You can set background image for whole table or just for one cell.

You can also set border color also using bordercolor attribute.
Example
<!DOCTYPE html>
<html>
<head>
<title>HTML Table Background</title>
</head>
<body>
<table border="1" bordercolor="green" bgcolor="yellow">
<tr>
<th>Column 1</th>
<th>Column 2</th>
<th>Column 3</th>
</tr>
<tr><td rowspan="2">Row 1 Cell 1</td><td>Row 1 Cell 2</td><td>Row 1 Cell 3</td></tr>
<tr><td>Row 2 Cell 2</td><td>Row 2 Cell 3</td></tr>
<tr><td colspan="3">Row 3 Cell 1</td></tr>
</table>
</body>
</html>
This will produce the following result:
Column 1
Column 2
Column 3
Row 1 Cell 1
Row 1 Cell 2
Row 1 Cell 3
Row 2 Cell 2
Row 2 Cell 3
Row 3 Cell 1





Here is an example of using background attribute. Here we will use an image available in /images directory.
<!DOCTYPE html>
<html>
<head>
<title>HTML Table Background</title>
</head>
<body>
<table border="1" bordercolor="green" background="/images/test.png">
<tr>
<th>Column 1</th>
<th>Column 2</th>
<th>Column 3</th>
</tr>
<tr><td rowspan="2">Row 1 Cell 1</td><td>Row 1 Cell 2</td><td>Row 1 Cell 3</td></tr>
<tr><td>Row 2 Cell 2</td><td>Row 2 Cell 3</td></tr>
<tr><td colspan="3">Row 3 Cell 1</td></tr>
</table>
</body>
</html>
This will produce the following result.
Here background image did not apply to table's header.
Column 1
Column 2
Column 3
Row 1 Cell 1
Row 1 Cell 2
Row 1 Cell 3
Row 2 Cell 2
Row 2 Cell 3
Row 3 Cell 1




Table Height and Width
You can set a table width and height using width and height attributes. You can specify table width or height in terms of pixels or in terms of percentage of available screen area.
Example
<!DOCTYPE html>
<html>
<head>
<title>HTML Table Width/Height</title>
</head>
<body>
<table border="1" width="400" height="150">
<tr>
<td>Row 1, Column 1</td>
<td>Row 1, Column 2</td>
</tr>
<tr>
<td>Row 2, Column 1</td>
<td>Row 2, Column 2</td>
</tr>
</table>
</body>
</html>
This will produce the following result:
Row 1, Column 1
Row 1, Column 2
Row 2, Column 1
Row 2, Column 2

Table Caption
The caption tag will serve as a title or explanation for the table and it shows up at the top of the table. This tag is deprecated in newer version of HTML/XHTML.
Example
<!DOCTYPE html>
<html>
<head>
<title>HTML Table Caption</title>
</head>
<body>
<table border="1" width="100%">
<caption>This is the caption</caption>
<tr>
<td>row 1, column 1</td><td>row 1, column 2</td>
</tr>
<tr>
<td>row 2, column 1</td><td>row 2, column 2</td>
</tr>
</table>
</body>
</html>

This will produce the following result:
This is the caption
row 1, column 1
row 1, column 2
row 2, column 1
row 2, column 2

Table Header, Body, and Footer
Tables can be divided into three portions: a header, a body, and a foot. The head and foot are rather similar to headers and footers in a word-processed document that remain the same for every page, while the body is the main content holder of the table.
The three elements for separating the head, body, and foot of a table are:
<thead> - to create a separate table header.
<tbody> - to indicate the main body of the table.
<tfoot> - to create a separate table footer.

A table may contain several <tbody> elements to indicate different pages or groups of data. But it is notable that <thead> and <tfoot> tags should appear before <tbody>
Example
<!DOCTYPE html>
<html>
<head>
<title>HTML Table</title>
</head>
<body>
<table border="1" width="100%">
<thead>
<tr>
<td colspan="4">This is the head of the table</td>
</tr>
</thead>
<tfoot>
<tr>
<td colspan="4">This is the foot of the table</td>
</tr>
</tfoot>
<tbody>
<tr>
<td>Cell 1</td>
<td>Cell 2</td>
<td>Cell 3</td>
<td>Cell 4</td>
</tr>
</tbody>
</table>
</body>
</html>
This will produce the following result:
This is the head of the table
This is the foot of the table
Cell 1
Cell 2
Cell 3
Cell 4

Nested Tables
You can use one table inside another table. Not only tables you can use almost all the tags inside table data tag <td>.
Example
Following is the example of using another table and other tags inside a table cell.
<!DOCTYPE html>
<html>
<head>
<title>HTML Table</title>
</head>
<body>
<table border="1" width="100%">
<tr>
<td>
<table border="1" width="100%">
<tr>
<th>Name</th>
<th>Salary</th>
</tr>
<tr>
<td>Ramesh Raman</td>
<td>5000</td>
</tr>
<tr>
<td>Shabbir Hussein</td>
<td>7000</td>
</tr>
</table>
</td>
</tr>
</table>
</body>
</html>
This will produce the following result:

Name
 Salary

 Ramesh Raman
 5000

 Shabbir Hussein
 7000


UNIT-2
HTML – LISTS
HTML offers web authors three ways for specifying lists of information. All lists must contain one or more list elements. Lists may contain:
<ul> - An unordered list. This will list items using plain bullets.
<ol> - An ordered list. This will use different schemes of numbers to list your items.
<dl> - A definition list. This arranges your items in the same way as they are arranged in a dictionary.

HTML Unordered Lists
An unordered list is a collection of related items that have no special order or sequence. This list is created by using HTML <ul> tag. Each item in the list is marked with a bullet.
Example
<!DOCTYPE html>
<html>
<head>
<title>HTML Unordered List</title>
</head>
<body>
<ul>
<li>Beetroot</li>
<li>Ginger</li>
<li>Potato</li>
<li>Radish</li>
</ul>
</body>
</html>
This will produce the following result:
 Beetroot
 Ginger
 Potato
 Radish

The type Attribute
You can use type attribute for <ul> tag to specify the type of bullet you like. By default, it is a disc. Following are the possible options:
<ul type="square">
<ul type="disc">
<ul type="circle">
Example
Following is an example where we used <ul type="square">
<!DOCTYPE html>
<html>
<head>
<title>HTML Unordered List</title>
</head>
<body>
<ul type="square">
<li>Beetroot</li>
<li>Ginger</li>
<li>Potato</li>
<li>Radish</li>
</ul>
</body>
</html>
This will produce the following result:
 Beetroot
 Ginger
 Potato
 Radish

Example
Following is an example where we used <ul type="disc">:
<!DOCTYPE html>
<html>
<head>
<title>HTML Unordered List</title>
</head>
<body>
<ul type="disc">
<li>Beetroot</li>
<li>Ginger</li>
<li>Potato</li>
<li>Radish</li>
</ul>
</body>
</html>
This will produce the following result:
 Beetroot
 Ginger
 Potato
 Radish

Example
Following is an example where we used <ul type="circle">:
<!DOCTYPE html>
<html>
<head>
<title>HTML Unordered List</title>
</head>
<body>
<ul type="circle">
<li>Beetroot</li>
<li>Ginger</li>
<li>Potato</li>
<li>Radish</li>
</ul>
</body>
</html>
This will produce the following result:
 Beetroot
 Ginger
 Potato
 Radish 
HTML Ordered Lists
If you are required to put your items in a numbered list instead of bulleted, then HTML ordered list will be used. This list is created by using <ol> tag. The numbering starts at one and is incremented by one for each successive ordered list element tagged with <li>.
Example
<!DOCTYPE html>
<html>
<head>
<title>HTML Ordered List</title>
</head>
<body>
<ol>
<li>Beetroot</li>
<li>Ginger</li>
<li>Potato</li>
<li>Radish</li>
</ol>
</body>
</html>
This will produce the following result:
 Beetroot
 Ginger
 Potato
 Radish
The type Attribute
You can use type attribute for <ol> tag to specify the type of numbering you like. By default, it is a number. Following are the possible options:
<ol type="1"> - Default-Case Numerals.
<ol type="I"> - Upper-Case Numerals.
<ol type="i"> - Lower-Case Numerals.
<ol type="a"> - Lower-Case Letters.
<ol type="A"> - Upper-Case Letters.
Example
Following is an example where we used <ol type="1">
<!DOCTYPE html>
<html>
<head>
<title>HTML Ordered List</title>
</head>
<body>
<ol type="1">
<li>Beetroot</li>
<li>Ginger</li>
<li>Potato</li>
<li>Radish</li>
</ol>
</body>
</html>
This will produce the following result:
 Beetroot
 Ginger
 Potato
 Radish

Example
Following is an example where we used <ol type="I">
<!DOCTYPE html>
<html>
<head>
<title>HTML Ordered List</title>
</head>
<body>
<ol type="I">
<li>Beetroot</li>
<li>Ginger</li>
<li>Potato</li>
<li>Radish</li>
</ol>
</body>
</html>
This will produce the following result:
 Beetroot
 Ginger
 Potato
 Radish

Example
Following is an example where we used <ol type="i">
<!DOCTYPE html>
<html>
<head>
<title>HTML Ordered List</title>
</head>
<body>
<ol type="i">
<li>Beetroot</li>
<li>Ginger</li>
<li>Potato</li>
<li>Radish</li>
</ol>
</body>
</html>
This will produce the following result:
 Beetroot
 Ginger
 Potato
 Radish

Example
Following is an example where we used <ol type="A">
<!DOCTYPE html>
<html>
<head>
<title>HTML Ordered List</title>
</head>
<body>
<ol type="A">
<li>Beetroot</li>
<li>Ginger</li>
<li>Potato</li>
<li>Radish</li>
</ol>
</body>
</html>
This will produce the following result:
 Beetroot
 Ginger
 Potato
 Radish

Example
Following is an example where we used <ol type="a">
<!DOCTYPE html>
<html>
<head>
<title>HTML Ordered List</title>
</head>
<body>
<ol type="a">
<li>Beetroot</li>
<li>Ginger</li>
<li>Potato</li>
<li>Radish</li>
</ol>
</body>
</html>
This will produce the following result:
 Beetroot
 Ginger
 Potato
 Radish
The start Attribute
You can use start attribute for <ol> tag to specify the starting point of numbering you need. Following are the possible options:
<ol type="1" start="4"> - Numerals starts with 4.
<ol type="I" start="4"> - Numerals starts with IV.
<ol type="i" start="4"> - Numerals starts with iv.
<ol type="a" start="4"> - Letters starts with d.
<ol type="A" start="4"> - Letters starts with D.
Example
Following is an example where we used <ol type="i" start="4" >
<!DOCTYPE html>
<html>
<head>
<title>HTML Ordered List</title>
</head>
<body>
<ol type="i" start="4">
<li>Beetroot</li>
<li>Ginger</li>
<li>Potato</li>
<li>Radish</li>
</ol>
</body>
</html>

This will produce the following result:
 Beetroot
 Ginger
 Potato
 Radish

HTML Definition Lists
HTML and XHTML supports a list style which is called definition lists where entries are listed like in a dictionary or encyclopedia. The definition list is the ideal way to present a glossary, list of terms, or other name/value list.
Definition List makes use of following three tags.
 <dl> - Defines the start of the list
 <dt> - A term
 <dd> - Term definition
 </dl> - Defines the end of the list

Example
<!DOCTYPE html>
<html>
<head>
<title>HTML Definition List</title>
</head>
<body>
<dl>
<dt><b>HTML</b></dt>
<dd>This stands for Hyper Text Markup Language</dd>
<dt><b>HTTP</b></dt>
<dd>This stands for Hyper Text Transfer Protocol</dd>
</dl>
</body>
</html>
This will produce the following result:
HTML
This stands for Hyper Text Markup Language
HTTP
This stands for Hyper Text Transfer Protocol

HTML – TEXT LINKS
A webpage can contain various links that take you directly to other pages and even specific parts of a given page. These links are known as hyperlinks.
Hyperlinks allow visitors to navigate between Web sites by clicking on words, phrases, and images. Thus you can create hyperlinks using text or images available on a webpage.
Note: I recommend you to go through a short tutorial on Understanding URL

Linking Documents
A link is specified using HTML tag <a>. This tag is called anchor tag and anything between the opening <a> tag and the closing </a> tag becomes part of the link and a user can click that part to reach to the linked document. Following is the simple syntax to use <a> tag.
<a href="Document URL" ... attributes-list>Link Text</a>
Example
Let's try following example which links http://www.tutorialspoint.com at your page:
<!DOCTYPE html>
<html>
<head>
<title>Hyperlink Example</title>
</head>
<body>
<p>Click following link</p>
<a href="http://www.tutorialspoint.com" target="_self">This is sudhakar</a>
</body>
</html>
This will produce the following result.
 where you can click on the link generated to reach to the home page of Tutorials Point (in this example).
Click following link
This is sudhakar

The target Attribute
We have used target attribute in our previous example. This attribute is used to specify the location where linked document is opened. Following are the possible options:
Option
Description
_blank
Opens the linked document in a new window or tab.
_self
Opens the linked document in the same frame.
_parent
Opens the linked document in the parent frame.
_top
Opens the linked document in the full body of the window.
targetframe
Opens the linked document in a named targetframe.

Example
Try following example to understand basic difference in few options given for target attribute.
<!DOCTYPE html>
<html>
<head>
<title>Hyperlink Example</title>
<base href="http://www.tutorialspoint.com/">
</head>
<body>
<p>Click any of the following links</p>
<a href="/html/index.htm" target="_blank">Opens in New</a> |
<a href="/html/index.htm" target="_self">Opens in Self</a> |
<a href="/html/index.htm" target="_parent">Opens in Parent</a> |
<a href="/html/index.htm" target="_top">Opens in Body</a>
</body>
</html>
This will produce the following result.
 where you can click on different links to understand the difference between various options given for target attribute.
Click any of the following links
Opens in New | Opens in Self | Opens in Parent | Opens in Body
Use of Base Path
When you link HTML documents related to the same website, it is not required to give a complete URL for every link. You can get rid of it if you use <base> tag in your HTML document header. This tag is used to give a base path for all the links. So your browser will concatenate given relative path to this base path and will make a complete URL.
Example
Following example makes use of <base> tag to specify base URL and later we can use relative path to all the links instead of giving complete URL for every link.
<!DOCTYPE html>
<html>
<head>
<title>Hyperlink Example</title>
<base href="http://www.tutorialspoint.com/">
</head>
<body>
<p>Click following link</p>
<a href="/html/index.htm" target="_blank">HTML Tutorial</a>
</body>
</html>
This will produce the following result, where you can click on the link generated HTML Tutorial to reach to the HTML tutorial.
Now given URL <a href="/html/index.htm" is being considered as <ahref="http://www.tutorialspoint.com/html/index.htm"
Click following link
HTML Tutorial
Linking to a Page Section
You can create a link to a particular section of a given webpage by using name attribute. This is a two-step process.
First create a link to the place where you want to reach with-in a webpage and name it using <a...> tag as follows:
<h1>HTML Text Links <a name="top"></a></h1>
Second step is to create a hyperlink to link the document and place where you want to reach:
<a href="/html/html_text_links.htm#top">Go to the Top</a>
This will produce following link, where you can click on the link generated Go to the Top to reach to the top of the HTML Text Link tutorial.

Setting Link Colors
You can set colors of your links, active links and visited links using link, alink and vlink attributes of <body> tag.
Example
Save the following in test.htm and open it in any web browser to see how link, alink and vlink attributes work.
<!DOCTYPE html>
<html>
<head>
<title>Hyperlink Example</title>
<base href="http://www.tutorialspoint.com/">
</head>
<body alink="#54A250" link="#040404" vlink="#F40633">
<p>Click following link</p>
<a href="/html/index.htm" target="_blank" >HTML Tutorial</a>
</body>
</html>
This will produce the following result. Just check color of the link before clicking on it, next check its color when you activate it and when the link has been visited.
Click following link
HTML Tutorial
Download Links
You can create text link to make your PDF, or DOC or ZIP files downloadable. This is very simple; you just need to give complete URL of the downloadable file as follows:
<!DOCTYPE html>
<html>
<head>
<title>Hyperlink Example</title>
</head>
<a href="http://www.tutorialspoint.com/page.pdf">Download PDF File</a>
</body>
</html>
This will produce following link and will be used to download a file.
Download PDF File
File Download Dialog Box
Sometimes it is desired that you want to give an option where a user will click a link and it will pop up a "File Download" box to the user instead of displaying actual content. This is very easy and can be achieved using an HTTP header in your HTTP response.
For example, if you want make a Filename file downloadable from a given link then its syntax will be as follows.
#!/usr/bin/perl
# Additional HTTP Header
print "Content-Type:application/octet-stream; name=\"FileName\"\r\n";
print "Content-Disposition: attachment; filename=\"FileName\"\r\n\n";
# Open the target file and list down its content as follows
open( FILE, "<FileName" );
while(read(FILE, $buffer, 100)){
print("$buffer");
}
Note: For more detail on PERL CGI programs, go through tutorial PERL and CGI.
HTML – IMAGE LINKS
We have seen how to create hypertext link using text and we also learnt how to use images in our webpages. Now, we will learn how to use images to create hyperlinks.
Example
It's simple to use an image as hyperlink. We just need to use an image inside hyperlink at the place of text as shown below:
<!DOCTYPE html>
<html>
<head>
<title>Image Hyperlink Example</title>
</head>
<body>
<p>Click following link</p>
<a href="http://www.tutorialspoint.com" target="_self">
<img src="/images/logo.png" alt="Tutorials Point" border="0"/>
</a>
</body>
</html>
This will produce the following result, where you can click on the images to reach to the home page of Tutorials Point.
Click following link
This was the simplest way of creating hyperlinks using images. Next we will see how we can create Mouse-Sensitive Image Links.
Mouse-Sensitive Images
The HTML and XHTML standards provides a feature that lets you embed many different links inside a single image. You can create different links on the single image based on different coordinates available on the image. Once different links are attached to different coordinates, we can click different parts of the image to open target documents. Such mouse-sensitive images are known as image maps.
There are two ways to create image maps:
Server-side image maps - This is enabled by the ismap attribute of the <img> tag and requires access to a server and related image-map processing applications.
Client-side image maps - This is created with the usemap attribute of the <img> tag, along with corresponding <map> and <area> tags.
Server-Side Image Maps
Here you simply put your image inside a hyper link and use ismap attribute which makes it special image and when the user clicks some place within the image, the browser passes the coordinates of the mouse pointer along with the URL specified in the <a> tag to the web server. The server uses the mouse-pointer coordinates to determine which document to deliver back to the browser.
When ismap is used, the href attribute of the containing <a> tag must contain the URL of a server application like a cgi or PHP script etc. to process the incoming request based on the passed coordinates.
The coordinates of the mouse position are screen pixels counted from the upper-left corner of the image, beginning with (0,0). The coordinates, preceded by a question mark, are added to the end of the URL.
For example, if a user clicks 20 pixels over and 30 pixels down from the upper-left corner of the following image:
Click following link
Which has been generated by the following code snippet:
<!DOCTYPE html>
<html>
<head>
<title>ISMAP Hyperlink Example</title>
</head>
<body>
<p>Click following link</p>
<a href="/cgi-bin/ismap.cgi" target="_self">
<img ismap src="/images/logo.png" alt="Tutorials Point" border="0"/>
</a>
</body>
</html>
Then the browser sends the following search parameters to the web server which can be processed by ismap.cgi script or map file and you can link whatever documents you like to these coordinates:
/cgi-bin/ismap.cgi?20,30
This way you can assign different links to different coordinates of the image and when those coordinates are clicked, you can open corresponding linked document. To learn more about ismap attribute, you can check How to use Image ismap?
Note: You will learn CGI programming when you will study Perl programming. You can write your script to process these passed coordinates using PHP or any other script as well. For now, let's concentrate on learning HTML and later you can revisit this section.

Client-Side Image Maps
Client side image maps are enabled by the usemap attribute of the <img /> tag and defined by special <map> and <area> extension tags.
The image that is going to form the map is inserted into the page using the <img /> tag as a normal image, except it carries an extra attribute called usemap. The value of the usemap attribute is the value which will be used in a <map> tag to link map and image tags. The <map> along with <area> tags define all the image coordinates and corresponding links.
The <area> tag inside the map tag, specifies the shape and the coordinates to define the boundaries of each clickable hotspot available on the image. Here's an example from the image map:
<!DOCTYPE html>
<html>
<head>
<title>USEMAP Hyperlink Example</title>
</head>
<body>
<p>Search and click the hotspot</p>
<img src=/images/html.gif alt="HTML Map" border="0" usemap="#html"/>
<!-- Create Mappings -->
<map name="html">
<area shape="circle"
coords="80,80,20" href="/css/index.htm" alt="CSS Link" target="_self" />
<area shape="rect"
coords="5,5,40,40" alt="jQuery Link" href="/jquery/index.htm" target="_self" />
</map>
</body>
</html>

Coordinate System
The actual value of coords is totally dependent on the shape in question. Here is a summary, to be followed by detailed examples:
rect = x1 , y1 , x2 , y2
x1 and y1 are the coordinates of the upper left corner of the rectangle; x2 and y2 are the coordinates of the lower right corner.
circle = xc , yc , radius
xc and yc are the coordinates of the center of the circle, and radius is the circle's radius. A circle centered at 200,50 with a radius of 25 would have the attribute coords="200,50,25"
poly = x1 , y1 , x2 , y2 , x3 , y3 , ... xn , yn
The various x-y pairs define vertices (points) of the polygon, with a "line" being drawn from one point to the next point. A diamond-shaped polygon with its top point at 20,20 and 40 pixels across at its widest points would have the attribute coords="20,20,40,40,20,60,0,40".
All coordinates are relative to the upper-left corner of the image (0,0). Each shape has a related URL. You can use any image software to know the coordinates of different positions.

HTML – FRAMES
HTML frames are used to divide your browser window into multiple sections where each section can load a separate HTML document. A collection of frames in the browser window is known as a frameset. The window is divided into frames in a similar way the tables are organized: into rows and columns.
Disadvantages of Frames
There are few drawbacks with using frames, so it's never recommended to use frames in your webpages:
 Some smaller devices cannot cope with frames often because their screen is not big enough to be divided up.
 Sometimes your page will be displayed differently on different computers due to different screen resolution.
 The browser's back button might not work as the user hopes.
 There are still few browsers that do not support frame technology.
Creating Frames
To use frames on a page we use <frameset> tag instead of <body> tag. The <frameset> tag defines, how to divide the window into frames. The rows attribute of <frameset> tag defines horizontal frames and cols attribute defines vertical frames. Each frame is indicated by <frame> tag and it defines which HTML document shall open into the frame.
Example
Following is the example to create three horizontal frames:
<!DOCTYPE html>
<html>
<head>
<title>HTML Frames</title>
</head>
<frameset rows="10%,80%,10%">
<frame name="top" src="/html/top_frame.htm" />
<frame name="main" src="/html/main_frame.htm" />
<frame name="bottom" src="/html/bottom_frame.htm" />
<noframes>
<body>Your browser does not support frames.
</body>
</noframes>
</frameset>
</html>
This will produce the following result:




Example
Let's put the above example as follows, here we replaced rows attribute by cols and changed their width. This will create all the three frames vertically:
<!DOCTYPE html>
<html>
<head>
<title>HTML Frames</title>
</head>
<frameset cols="25%,50%,25%">
<frame name="left" src="/html/top_frame.htm" />
<frame name="center" src="/html/main_frame.htm" />
<frame name="right" src="/html/bottom_frame.htm" />
<noframes>
<body>
Your browser does not support frames.
</body>
</noframes>
</frameset>
</html>

This will produce the following result:







The <frameset> Tag Attributes
Following are important attributes of the <frameset> tag: Attribute
Description
cols
Specifies how many columns are contained in the frameset and the size of each column. You can specify the width of each column in one of the four ways:
Absolute values in pixels. For example, to create three vertical frames, use cols="100, 500,100".
A percentage of the browser window. For example, to create three vertical frames, use cols="10%, 80%,10%".
Using a wildcard symbol. For example, to create three vertical frames, use cols="10%, *,10%". In this case wildcard takes remainder of the window.
As relative widths of the browser window. For example, to create three vertical frames, use cols="3*,2*,1*". This is an alternative to percentages. You can use relative widths of the browser window. Here the window is divided into sixths: the first column takes up half of the window, the second takes one third, and the third takes one sixth.
rows
This attribute works just like the cols attribute and takes the same values, but it is used to specify the rows in the frameset. For example, to create two horizontal frames, use rows="10%, 90%". You can specify the height of each row in the same way as explained above for columns.
border
This attribute specifies the width of the border of each frame in pixels. For example, border="5". A value of zero means no border.
frameborder
This attribute specifies whether a three-dimensional border should be displayed between frames. This attribute takes value either 1 (yes) or 0 (no). For example frameborder="0" specifies no border.
framespacing
This attribute specifies the amount of space between frames in a frameset. This can take any integer value. For example framespacing="10" means there should be 10 pixels spacing between each frames.



The <frame> Tag Attributes
Following are the important attributes of <frame> tag: Attribute
Description
src
This attribute is used to give the file name that should be loaded in the frame. Its value can be any URL. For example, src="/html/top_frame.htm" will load an HTML file available in html directory.
name
This attribute allows you to give a name to a frame. It is used to indicate which frame a document should be loaded into. This is especially important when you want to create links in one frame that load pages into an another frame, in which case the second frame needs a name to identify itself as the target of the link.
frameborder
This attribute specifies whether or not the borders of that frame are shown; it overrides the value given in the frameborder attribute on the <frameset> tag if one is given, and this can take values either 1 (yes) or 0 (no).
marginwidth
This attribute allows you to specify the width of the space between the left and right of the frame's borders and the frame's content. The value is given in pixels. For example marginwidth="10".
marginheight
This attribute allows you to specify the height of the space between the top and bottom of the frame's borders and its contents. The value is given in pixels. For example marginheight="10".
noresize
By default, you can resize any frame by clicking and dragging on the borders of a frame. The noresize attribute prevents a user from being able to resize the frame. For example noresize="noresize".
scrolling
This attribute controls the appearance of the scrollbars that appear on the frame. This takes values either "yes", "no" or "auto". For example scrolling="no" means it should not have scroll bars.
longdesc
This attribute allows you to provide a link to another page containing a long description of the contents of the frame. For example longdesc="framedescription.htm"



Browser Support for Frames
If a user is using any old browser or any browser, which does not support frames then <noframes> element should be displayed to the user.
So you must place a <body> element inside the <noframes> element because the <frameset> element is supposed to replace the <body> element, but if a browser does not understand <frameset> element then it should understand what is inside the <body> element which is contained in a <noframes> element.
You can put some nice message for your user having old browsers. For example, Sorry!! your browser does not support frames. as shown in the above example.

Frame's name and target attributes
One of the most popular uses of frames is to place navigation bars in one frame and then load main pages into a separate frame.
Let's see following example where a test.htm file has following code:
<!DOCTYPE html>
<html>
<head>
<title>HTML Target Frames</title>
</head>
<frameset cols="200, *">
<frame src="/html/menu.htm" name="menu_page" />
<frame src="/html/main.htm" name="main_page" />
<noframes>
<body>
Your browser does not support frames.
</body>
</noframes>
</frameset>
</html>
Here, we have created two columns to fill with two frames. The first frame is 200 pixels wide and will contain the navigation menu bar implemented by menu.htm file. The second column fills in remaining space and will contain the main part of the page and it is implemented by main.htm file. For all the three links available in menu bar, we have mentioned target frame as main_page, so whenever you click any of the links in menu bar, available link will open in main page.
Following is the content of menu.htm file
<!DOCTYPE html>
<html>
<body bgcolor="#4a7d49">
<a href="http://www.google.com" target="main_page">Google</a>
<br /><br />
<a href="http://www.microsoft.com" target="main_page">Microsoft</a>
<br /><br />
<a href="http://news.bbc.co.uk" target="main_page">BBC News</a>
</body>
</html>
Following is the content of main.htm file:
<!DOCTYPE html>
<html>
<body bgcolor="#b5dcb3">
<h3>This is main page and content from any link will be displayed here.</h3>
<p>So now click any link and see the result.</p>
</body>
</html>

When we load test.htm file, it produces following result:


Now you can try to click links available in the left panel and see the result. The targetattribute can also take one of the following values:


Option
Description
_self
Loads the page into the current frame.
_blank
Loads a page into a new browser window.opening a new window.
_parent
Loads the page into the parent window, which in the case of a single frameset is the main browser window.
_top
Loads the page into the browser window, replacing any current frames.
targetframe
Loads the page into a named targetframe.

HTML – IFRAMES
You can define an inline frame with HTML tag <iframe>. The <iframe> tag is not somehow related to <frameset> tag, instead, it can appear anywhere in your document. The <iframe> tag defines a rectangular region within the document in which the browser can display a separate document, including scrollbars and borders.
The src attribute is used to specify the URL of the document that occupies the inline frame.
Example
Following is the example to show how to use the <iframe>:
<!DOCTYPE html>
<html>
<head>
<title>HTML Iframes</title>
</head>
<body>
<p>Document content goes here...</p>
<iframe src="/html/menu.htm" width="555" height="200">
Sorry your browser does not support inline frames.
</iframe>
<p>Document content also go here...</p>
</body>
</html>
This will produce the following result:
Document content goes here...
Document content can also go here...

The <Iframe> Tag Attributes
Most of the attributes of the <iframe> tag, including name, class, frameborder, id, longdesc, marginheight, marginwidth, name, scrolling, style, and title behave exactly like the corresponding attributes for the <frame> tag.
Attribute
Description
src
This attribute is used to give the file name that should be loaded in the frame. Its value can be any URL. For example,
src="/html/top_frame.htm" will load an HTML file available in html directory.
name
This attribute allows you to give a name to a frame. It is used to indicate which frame a document should be loaded into. This is especially important when you want to create links in one frame that load pages into an another frame, in which case the second frame needs a name to identify itself as the target of the link.
frameborder
This attribute specifies whether or not the borders of that frame are shown; it overrides the value given in the frameborder attribute on the <frameset> tag if one is given, and this can take values either 1 (yes) or 0 (no).
marginwidth
This attribute allows you to specify the width of the space between the left and right of the frame's borders and the frame's content. The value is given in pixels. For example marginwidth="10".
marginheight
This attribute allows you to specify the height of the space between the top and bottom of the frame's borders and its contents. The value is given in pixels. For example marginheight="10".
noresize
By default, you can resize any frame by clicking and dragging on the borders of a frame. The noresize attribute prevents a user from being able to resize the frame. For example noresize="noresize".
scrolling
This attribute controls the appearance of the scrollbars that appear on the frame. This takes values either "yes", "no" or "auto". For example scrolling="no" means it should not have scroll bars.
longdesc
This attribute allows you to provide a link to another page containing a long description of the contents of the frame. For example longdesc="framedescription.htm"


HTML – BLOCKS
All the HTML elements can be categorized into two categories (a) Block Level Elements (b)Inline Elements.

Block Elements
Block elements appear on the screen as if they have a line break before and after them. For example, the <p>, <h1>, <h2>, <h3>, <h4>, <h5>, <h6>, <ul>, <ol>, <dl>, <pre>, <hr />, <blockquote>, and <address> elements are all block level elements. They all start on their own new line, and anything that follows them appears on its own new line.


Inline Elements
Inline elements, on the other hand, can appear within sentences and do not have to appear on a new line of their own. The <b>, <i>, <u>, <em>, <strong>, <sup>, <sub>, <big>, <small>, <li>, <ins>, <del>, <code>, <cite>, <dfn>, <kbd>, and <var> elements are all inline elements.

Grouping HTML Elements
There are two important tags which we use very frequently to group various other HTML tags (i) <div> tag and (ii) <span> tag

The <div> tag
This is the very important block level tag which plays a big role in grouping various other HTML tags and applying CSS on group of elements. Even now <div> tag can be used to create webpage layout where we define different parts (Left, Right, Top etc.) of the page using <div> tag. This tag does not provide any visual change on the block but this has more meaning when it is used with CSS.
Example
Following is a simple example of <div> tag. We will learn Cascading Style Sheet (CSS) in a separate chapter but we used it here to show the usage of <div> tag:
<!DOCTYPE html>
<html>
<head>
<title>HTML div Tag</title>
</head>
<body>
<!-- First group of tags -->
<div style="color:red">
<h4>This is first group</h4>
<p>Following is a list of vegetables</p>
<ul>
<li>Beetroot</li>
<li>Ginger</li>
<li>Potato</li>
<li>Radish</li>
</ul>
</div>
<!-- Second group of tags -->
<div style="color:green">
<h4>This is second group</h4>
<p>Following is a list of fruits</p>
<ul>
<li>Apple</li>
<li>Banana</li>
<li>Mango</li>
<li>Strawberry</li>
</ul>
</div>
</body>
</html>
This will produce the following result:
THIS IS FIRST GROUP
Following is a list of vegetables
 Beetroot
 Ginger
 Potato
 Radish

THIS IS SECOND GROUP
Following is a list of fruits

 Apple
 Banana
 Mango
 Strawberry

The <span> tag
The HTML <span> is an inline element and it can be used to group inline-elements in an HTML document. This tag also does not provide any visual change on the block but has more meaning when it is used with CSS.
The difference between the <span> tag and the <div> tag is that the <span> tag is used with inline elements whereas the <div> tag is used with block-level elements.
Example
Following is a simple example of <span> tag. We will learn Cascading Style Sheet (CSS) in a separate chapter but we used it here to show the usage of <span> tag:
<!DOCTYPE html>
<html>
<head>
<title>HTML span Tag</title>
</head>
<body>
<p>This is <span style="color:red">red</span> and this is <span style="color:green">green</span></p>
</body>
</html>
This will produce the following result:
This is red, and this is green

HTML – BACKGROUNDS
By default, your webpage background is white in color. You may not like it, but no worries. HTML provides you following two good ways to decorate your webpage background.
 Html Background with Colors
 Html Background with Images
Now let's see both the approaches one by one using appropriate examples.
Html Background with Colors
The bgcolor attribute is used to control the background of an HTML element, specifically page body and table backgrounds. Following is the syntax to use bgcolor attribute with any HTML tag.
<tagname bgcolor="color_value"...>
This color_value can be given in any of the following formats:
<!-- Format 1 - Use color name -->
<table bgcolor="lime" >
<!-- Format 2 - Use hex value -->
<table bgcolor="#f1f1f1" >
<!-- Format 3 - Use color value in RGB terms -->
<table bgcolor="rgb(0,0,120)" >
Example
Here are the examples to set background of an HTML tag:
<!DOCTYPE html>
<html>
<head>
<title>HTML Background Colors</title>
</head>
<body>
<!-- Format 1 - Use color name -->
<table bgcolor="yellow" width="100%">
<tr><td>
This background is yellow
</td></tr>
</table>
<!-- Format 2 - Use hex value -->
<table bgcolor="#6666FF" width="100%">
<tr><td>
This background is sky blue
</td></tr>
</table>
<!-- Format 3 - Use color value in RGB terms -->
<table bgcolor="rgb(255,0,255)" width="100%">
<tr><td>
This background is green
</td></tr>
</table>
</body>
</html>
This will produce the following result:
This background is yellow
This background is sky blue
This background is green

Html Background with Images
The background attribute can also be used to control the background of an HTML element, specifically page body and table backgrounds. You can specify an image to set background of your HTML page or table. Following is the syntax to use background attribute with any HTML tag.
Note: The background attribute is deprecated and it is recommended to use Style Sheet for background setting.
<tagname background="Image URL"...>
The most frequently used image formats are JPEG, GIF and PNG images.
Example
Here are the examples to set background images of a table.
<!DOCTYPE html>
<html>
<head>
<title>HTML Background Images</title>
</head>
<body>
<!-- Set table background -->
<table background="/images/html.gif" width="100%" height="100">
<tr><td>
This background is filled up with HTML image.
</td></tr>
</table>
</body>
</html>
This will produce the following result: This background is filled up with HTML image.
Patterned & Transparent Backgrounds
You might have seen many pattern or transparent backgrounds on various websites. This simply can be achieved by using patterned image or transparent image in the background.
It is suggested that while creating patterns or transparent GIF or PNG images, use the smallest dimensions possible even as small as 1x1 to avoid slow loading.
Example
Here are the examples to set background pattern of a table:
<!DOCTYPE html>
<html>
<head>
<title>HTML Background Images</title>
</head>
<body>
<!-- Set a table background using pattern -->
<table background="/images/pattern1.gif" width="100%" height="100">
<tr><td>
This background is filled up with a pattern image.
</td></tr>
</table>
<!-- Another example on table background using pattern -->
<table background="/images/pattern2.gif" width="100%" height="100">
<tr><td>
This background is filled up with a pattern image.
</td></tr>
</table>
</body>
</html>
This will produce the following result:


HTML – COLORS

Colors are very important to give a good look and feel to your website. You can specify colors on page level using <body> tag or you can set colors for individual tags using bgcolor attribute.
The <body> tag has following attributes which can be used to set different colors:
bgcolor - sets a color for the background of the page.
text - sets a color for the body text.
alink - sets a color for active links or selected links.
link - sets a color for linked text.
vlink - sets a color for visited links - that is, for linked text that you have already clicked on.
HTML Color Coding Methods
There are following three different methods to set colors in your web page:
Color names - You can specify color names directly like green, blue or red.
Hex codes - A six-digit code representing the amount of red, green, and blue that makes up the color.
Color decimal or percentage values - This value is specified using the rgb() property.
Now we will see these coloring schemes one by one.
HTML Colors - Color Names
You can specify direct a color name to set text or background color. W3C has listed 16 basic color names that will validate with an HTML validator but there are over 200 different color names supported by major browsers.
Note: Check a complete list of HTML Color Name.  
W3C Standard 16 Colors
Here is the list of W3C Standard 16 Colors names and it is recommended to use them.
Black
Gray
Silver
White
Yellow
Lime
Aqua
Fuchsia
Red
Green
Blue
Purple
Maroon
Olive
Navy
Teal

Example
Here are the examples to set background of an HTML tag by color name:
<!DOCTYPE html>
<html>
<head>
<title>HTML Colors by Name</title>
</head>
<body text="blue" bgcolor="green">
<p>Use different color names for for body and table and see the result.</p>
<table bgcolor="black">
<tr>
<td>
<font color="white">This text will appear white on black background.</font>
</td>
</tr>
</table>
</body>
</html>
HTML Colors - Hex Codes
A hexadecimal is a 6 digit representation of a color. The first two digits(RR) represent a red value, the next two are a green value(GG), and the last are the blue value(BB).
A hexadecimal value can be taken from any graphics software like Adobe Photoshop, Paintshop Pro or MS Paint.
Each hexadecimal code will be preceded by a pound or hash sign #. Following is a list of few colors using hexadecimal notation.
Color
Color HEX
#000000
#FF0000
#00FF00
#0000FF
#FFFF00
#00FFFF
#FF00FF
#C0C0C0
#FFFFFF

Example
Here are the examples to set background of an HTML tag by color code in hexadecimal:
<!DOCTYPE html>
<html>
<head>
<title>HTML Colors by Hex</title>
</head>
<body text="#0000FF" bgcolor="#00FF00">
<p>Use different color hexa for for body and table and see the result.</p>
<table bgcolor="#000000">
<tr>
<td>
<font color="#FFFFFF">This text will appear white on black background.</font>
</td>
</tr>
</table>
</body>
</html>
HTML Colors - RGB Values
This color value is specified using the rgb( ) property. This property takes three values, one each for red, green, and blue. The value can be an integer between 0 and 255 or a percentage.
Note: All the browsers does not support rgb() property of color so it is recommended not to use it.
Following is a list to show few colors using RGB values.
Color
Color RGB
rgb(0,0,0)
rgb(255,0,0)
rgb(0,255,0)
rgb(0,0,255)
rgb(255,255,0)
rgb(0,255,255)
rgb(255,0,255)
rgb(192,192,192)
rgb(255,255,255)

Example
Here are the examples to set background of an HTML tag by color code using rgb() values:
<!DOCTYPE html>
<html>
<head>
<title>HTML Colors by RGB code</title>
</head>
<body text="rgb(0,0,255)" bgcolor="rgb(0,255,0)">
<p>Use different color code for for body and table and see the result.</p>
<table bgcolor="rgb(0,0,0)">
<tr>
<td>
<font color="rgb(255,255,255)">This text will appear white on black background.</font>
</td>
</tr>
</table>
</body>
</html>

Browser Safe Colors
Here is the list of 216 colors which are supposed to be safest and computer independent colors. These colors very from hexa code 000000 to FFFFFF and they will be supported by all the computers having 256 color palette.
000000
000033
000066
000099
0000CC
0000FF
003300
003333
003366
003399
0033CC
0033FF
006600
006633
006666
006699
0066CC
0066FF
009900
009933
009966
009999
0099CC
0099FF
00CC00
00CC33
00CC66
00CC99
00CCCC
00CCFF
00FF00
00FF33
00FF66
00FF99
00FFCC
00FFFF
330000
330033
330066
330099
3300CC
3300FF
333300
333333
333366
333399
3333CC
3333FF
336600
336633
336666
336699
3366CC
3366FF
339900
339933
339966
339999
3399CC
3399FF
33CC00
33CC33
33CC66
33CC99
33CCCC
33CCFF
33FF00
33FF33
33FF66
33FF99
33FFCC
33FFFF
660000
660033
660066
660099
6600CC
6600FF
663300
663333
663366
663399
6633CC
6633FF
666600
666633
666666
666699
6666CC
6666FF
669900
669933
669966
669999
6699CC
6699FF
66CC00
66CC33
66CC66
66CC99
66CCCC
66CCFF
66FF00
66FF33
66FF66
66FF99
66FFCC
66FFFF
990000
990033
990066
990099
9900CC
9900FF
993300
993333
993366
993399
9933CC
9933FF
996600
996633
996666
996699
9966CC
9966FF
999900
999933
999966
999999
9999CC
9999FF
99CC00
99CC33
99CC66
99CC99
99CCCC
99CCFF
99FF00
99FF33
99FF66
99FF99
99FFCC
99FFFF
CC0000
CC0033
CC0066
CC0099
CC00CC
CC00FF
CC3300
CC3333
CC3366
CC3399
CC33CC
CC33FF
CC6600
CC6633
CC6666
CC6699
CC66CC
CC66FF
CC9900
CC9933
CC9966
CC9999
CC99CC
CC99FF
CCCC00
CCCC33
CCCC66
CCCC99
CCCCCC
CCCCFF
CCFF00
CCFF33
CCFF66
CCFF99
CCFFCC
CCFFFF
FF0000
FF0033
FF0066
FF0099
FF00CC
FF00FF
FF3300
FF3333
FF3366
FF3399
FF33CC
FF33FF
FF6600
FF6633
FF6666
FF6699
FF66CC
FF66FF
FF9900
FF9933
FF9966
FF9999
FF99CC
FF99FF
FFCC00
FFCC33
FFCC66
FFCC99
FFCCCC
FFCCFF
FFFF00
FFFF33
FFFF66
FFFF99
FFFFCC
FFFFFF





UNIT-3

HTML – FONTS

Fonts play a very important role in making a website more user friendly and increasing content readability. Font face and color depends entirely on the computer and browser that is being used to view your page but you can use HTML <font> tag to add style, size, and color to the text on your website. You can use a <basefont> tag to set all of your text to the same size, face, and color.
The font tag is having three attributes called size, color, and face to customize your fonts. To change any of the font attributes at any time within your webpage, simply use the <font> tag. The text that follows will remain changed until you close with the </font> tag. You can change one or all of the font attributes within one <font> tag.
Note: The font and basefont tags are deprecated and it is supposed to be removed in a future version of HTML. So they should not be used rather, it's suggested to use CSS styles to manipulate your fonts. But still for learning purpose, this chapter will explain font and basefont tags in detail.
Set Font Size
You can set content font size using size attribute. The range of accepted values is from 1(smallest) to 7(largest). The default size of a font is 3.
Example
<!DOCTYPE html>
<html>
<head>
<title>Setting Font Size</title>
</head>
<body>
<font size="1">Font size="1"</font><br />
<font size="2">Font size="2"</font><br />
<font size="3">Font size="3"</font><br />
<font size="4">Font size="4"</font><br />
<font size="5">Font size="5"</font><br />
<font size="6">Font size="6"</font><br />
<font size="7">Font size="7"</font>
</body>
</html>

This will produce the following result:
Font                                                                                                                             size="1"
Font                                                                                                                             size="2" Font                                                                                                                                     size="3" Font                                                                                                              size="4"
 Font                                                                                                    size="5" Font                                                                                     size="6" Font                                                                         size="7"

Relative Font Size
You can specify how many sizes larger or how many sizes smaller than the preset font size should be. You can specify it like <font size="+n"> or <font size="-n">
Example
<!DOCTYPE html>
<html>
<head>
<title>Relative Font Size</title>
</head>
<body>
<font size="-1">Font size="-1"</font><br />
<font size="+1">Font size="+1"</font><br />
<font size="+2">Font size="+2"</font><br />
<font size="+3">Font size="+3"</font><br />
<font size="+4">Font size="+4"</font>
</body>
</html>
This will produce the following result:
Font                                                                                                                             size="-1" Font                                                                                                                         size="+1" Font                                                                                                size="+2" Font                                                                                    size="+3" Font                                                            size="+4"
Setting Font Face
You can set font face using face attribute but be aware that if the user viewing the page doesn't have the font installed, they will not be able to see it. Instead user will see the default font face applicable to the user's computer.
Example
<!DOCTYPE html>
<html>
<head>
<title>Font Face</title>
</head>
<body>
<font face="Times New Roman" size="5">Times New Roman</font><br />
<font face="Verdana" size="5">Verdana</font><br />
<font face="Comic sans MS" size="5">Comic Sans MS</font><br />
<font face="WildWest" size="5">WildWest</font><br />
<font face="Bedrock" size="5">Bedrock</font><br />
</body>
</html>
This will produce the following result:
Times New Roman Verdana Comic Sans MS WildWest Bedrock
Specify alternate font faces
A visitor will only be able to see your font if they have that font installed on their computer. So, it is possible to specify two or more font face alternatives by listing the font face names, separated by a comma.
<font face="arial,helvetica">
<font face="Lucida Calligraphy,Comic Sans MS,Lucida Console">
When your page is loaded, their browser will display the first font face available. If none of the given fonts are installed, then it will display the default font face Times New Roman.
Note: Check a complete list of HTML Standard Fonts.

Setting Font Color
You can set any font color you like using color attribute. You can specify the color that you want by either the color name or hexadecimal code for that color.
Note: You can check a complete list of HTML Color Name with Codes.
Example
<!DOCTYPE html>
<html>
<head>
<title>Setting Font Color</title>
</head>
<body>
<font color="#FF00FF">This text is in pink</font><br />
<font color="red">This text is red</font>
</body>
</html>
This will produce the following result:
This text is in pink This text is red
The <basefont> Element:
The <basefont> element is supposed to set a default font size, color, and typeface for any parts of the document that are not otherwise contained within a <font> tag. You can use the <font> elements to override the <basefont> settings.
The <basefont> tag also takes color, size and face attributes and it will support relative font setting by giving size a value of +1 for a size larger or -2 for two sizes smaller.
Example
<!DOCTYPE html>
<html>
<head>
<title>Setting Basefont Color</title>
</head>
<body>
<basefont face="arial, verdana, sans-serif" size="2" color="#ff0000">
<p>This is the page's default font.</p>
<h2>Example of the &lt;basefont&gt; Element</h2>
<p><font size="+2" color="darkgray">
This is darkgray text with two sizes larger
</font></p>
<p><font face="courier" size="-1" color="#000000">
It is a courier font, a size smaller and black in color.
</font></p>
</body>
</html>
This will produce the following result:
This is the page's default font.
Example of the <basefont> Element
This is darkgray text with two sizes larger
It is a courier font, a size smaller and black in color.


HTML – FORMS

HTML Forms are required, when you want to collect some data from the site visitor. For example, during user registration you would like to collect information such as name, email address, credit card, etc.
A form will take input from the site visitor and then will post it to a back-end application such as CGI, ASP Script or PHP script etc. The back-end application will perform required processing on the passed data based on defined business logic inside the application.
There are various form elements available like text fields, textarea fields, drop-down menus, radio buttons, checkboxes, etc.
The HTML <form> tag is used to create an HTML form and it has following syntax:
<form action="Script URL" method="GET|POST">
form elements like input, textarea etc.
</form>
Form Attributes
Apart from common attributes, following is a list of the most frequently used form attributes:
Attribute
Description
action
Backend script ready to process your passed data.
method
Method to be used to upload data. The most frequently used are GET and POST methods.
target
Specify the target window or frame where the result of the script will be displayed. It takes values like _blank, _self, _parent etc.
enctype
You can use the enctype attribute to specify how the browser encodes the data before it sends it to the server. Possible values are:
application/x-www-form-urlencoded - This is the standard method most forms use in simple scenarios.
mutlipart/form-data - This is used when you want to upload binary data in the form of files like image, word file etc.
Note: You can refer to Perl & CGI for a detail on how form data upload works.

HTML Form Controls
There are different types of form controls that you can use to collect data using HTML form:
 Text Input Controls
 Checkboxes Controls
 Radio Box Controls
 Select Box Controls
 File Select boxes
 Hidden Controls
 Clickable Buttons
 Submit and Reset Button

Text Input Controls
There are three types of text input used on forms:
Single-line text input controls - This control is used for items that require only one line of user input, such as search boxes or names. They are created using HTML <input> tag.
Password input controls - This is also a single-line text input but it masks the character as soon as a user enters it. They are also created using HTMl <input> tag.
Multi-line text input controls - This is used when the user is required to give details that may be longer than a single sentence. Multi-line input controls are created using HTML <textarea> tag.

Single-line text input controls
This control is used for items that require only one line of user input, such as search boxes or names. They are created using HTML <input> tag.
Example
Here is a basic example of a single-line text input used to take first name and last name:
<!DOCTYPE html>
<html>
<head>
<title>Text Input Control</title>
</head>
<body>
<form >
First name: <input type="text" name="first_name" />
<br>
Last name: <input type="text" name="last_name" />
</form>
</body>
</html>
This will produce the following result:
First                                                                                                     name:
Last name:
Attributes
Following is the list of attributes for <input> tag for creating text field.
Attribute
Description
type
Indicates the type of input control and for text input control it will be set totext.
name
Used to give a name to the control which is sent to the server to be recognized and get the value.
value
This can be used to provide an initial value inside the control.
size
Allows to specify the width of the text-input control in terms of characters.
maxlength
Allows to specify the maximum number of characters a user can enter into the text box.



Password Input controls
This is also a single-line text input but it masks the character as soon as a user enters it. They are also created using HTML <input> tag but type attribute is set to password.
Example
Here is a basic example of a single-line password input used to take user password:
<!DOCTYPE html>
<html>
<head>
<title>Password Input Control</title>
</head>
<body>
<form >
User ID : <input type="text" name="user_id" />
<br>
Password: <input type="password" name="password" />
</form>
</body>
</html>
This will produce the following result:
User                                                                                         ID :                                        

Attributes
Following is the list of attributes for <input> tag for creating password field.
type
Indicates the type of input control and for password input control it will be set to password.
name
Used to give a name to the control which is sent to the server to be recognized and get the value.
value
This can be used to provide an initial value inside the control.
size
Allows to specify the width of the text-input control in terms of characters.
maxlength
Allows to specify the maximum number of characters a user can enter into the text box.
Multiple-Line Text Input Controls
This is used when the user is required to give details that may be longer than a single sentence. Multi-line input controls are created using HTML <textarea> tag.
Example
Here is a basic example of a multi-line text input used to take item description:
<!DOCTYPE html>
<html>
<head>
<title>Multiple-Line Input Control</title>
</head>
<body>
<form>
Description: <br />
<textarea rows="5" cols="50" name="description">
Enter description here...
</textarea>
</form>
</body>
</html>
This will produce the following result:
Description :


Attributes
Following is the list of attributes for <textarea> tag.
Attribute
Description
name
Used to give a name to the control which is sent to the server to be recognized and get the value.
rows
Indicates the number of rows of text area box.
cols
Indicates the number of columns of text area box

Checkbox Control
Checkboxes are used when more than one option is required to be selected. They are also created using HTML <input> tag but type attribute is set to checkbox.
Example
Here is an example HTML code for a form with two checkboxes:
<!DOCTYPE html>
<html>
<head>
<title>Checkbox Control</title>
</head>
<body>
<form>
<input type="checkbox" name="maths" value="on"> Maths
<input type="checkbox" name="physics" value="on"> Physics
</form>
</body>
</html>
Attributes
Following is the list of attributes for <checkbox> tag.

Attribute
Description
type
Indicates the type of input control and for checkbox input control it will be set to checkbox.
name
Used to give a name to the control which is sent to the server to be recognized and get the value.
value
The value that will be used if the checkbox is selected.
checked
Set to checked if you want to select it by default.

Radio Button Control
Radio buttons are used when out of many options, just one option is required to be selected. They are also created using HTML <input> tag but type attribute is set to radio.
Example
Here is example HTML code for a form with two radio buttons:
<!DOCTYPE html>
<html>
<head>
<title>Radio Box Control</title>
</head>
<body>
<form>
<input type="radio" name="subject" value="maths"> Maths
<input type="radio" name="subject" value="physics"> Physics
</form>
</body>
</html>
This will produce the following result:
Maths                            Physics
Attributes
Following is the list of attributes for radio button.
Attribute
Description
type
Indicates the type of input control and for checkbox input control it will be set to radio.
name
Used to give a name to the control which is sent to the server to be recognized and get the value.
value
The value that will be used if the radio box is selected.
checked
Set to checked if you want to select it by default.

Select Box Control
A select box, also called drop down box which provides option to list down various options in the form of drop down list, from where a user can select one or more options.
Example
Here is example HTML code for a form with one drop down box
<!DOCTYPE html>
<html>
<head>
<title>Select Box Control</title>
</head>
<body>
<form>
<select name="dropdown">
<option value="Maths" selected>Maths</option>
<option value="Physics">Physics</option>
</select>
</form>
</body>
</html>
Attributes
Following is the list of important attributes of <select> tag:
Attribute
Description
name
Used to give a name to the control which is sent to the server to be recognized and get the value.
size
This can be used to present a scrolling list box.
multiple
If set to "multiple" then allows a user to select multiple items from the menu.

Following is the list of important attributes of <option> tag:
Attribute
Description
value
The value that will be used if an option in the select box box is selected.
selected
Specifies that this option should be the initially selected value when the page loads.
label
An alternative way of labeling options

File Upload Box
If you want to allow a user to upload a file to your web site, you will need to use a file upload box, also known as a file select box. This is also created using the <input> element but type attribute is set to file.
Example
Here is example HTML code for a form with one file upload box:
<!DOCTYPE html>
<html>
<head>
<title>File Upload Box</title>
</head>
<body>
<form>
<input type="file" name="fileupload" accept="image/*" />
</form>
</body>
</html>
This will produce the following result:

Attributes
Following is the list of important attributes of file upload box:
Attribute
Description
name
Used to give a name to the control which is sent to the server to be recognized and get the value.
accept
Specifies the types of files that the server accepts.
           
Button Controls
There are various ways in HTML to create clickable buttons. You can also create a clickable button using <input> tag by setting its type attribute to button. The type attribute can take the following values:
Type
Description
submit
This creates a button that automatically submits a form.
reset
This creates a button that automatically resets form controls to their initial values.
button
This creates a button that is used to trigger a client-side script when the user clicks that button.
image
This creates a clickable button but we can use an image as background of the button.

Example
Here is example HTML code for a form with three types of buttons:
<!DOCTYPE html>
<html>
<head>
<title>File Upload Box</title>
</head>
<body>
<form>
<input type="submit" name="submit" value="Submit" />
<input type="reset" name="reset" value="Reset" />
<input type="button" name="ok" value="OK" />
<input type="image" name="imagebutton" src="/html/images/logo.png" />
</form>
</body>
</html>

Hidden Form Controls
Hidden form controls are used to hide data inside the page which later on can be pushed to the server. This control hides inside the code and does not appear on the actual page. For example, following hidden form is being used to keep current page number. When a user will click next page then the value of hidden control will be sent to the web server and there it will decide which page will be displayed next based on the passed current page.
Example
Here is example HTML code to show the usage of hidden control:
<!DOCTYPE html>
<html>
<head>
<title>File Upload Box</title>
</head>
<body>
<form>
<p>This is page 10</p>
<input type="hidden" name="pagename" value="10" />
<input type="submit" name="submit" value="Submit" />
<input type="reset" name="reset" value="Reset" />
</form>
</body>
</html>

HTML – MARQUEES

An HTML marquee is a scrolling piece of text displayed either horizontally across or vertically down your webpage depending on the settings. This is created by using HTML <marquees> tag.
Note: The HTML <marquee> tag may not be supported by various browsers so it is not recommended to rely on this tag, instead you can use JavaScript and CSS to create such effects.
Syntax
A simple syntax to use HTML <marquee> tag is as follows:
<marquee attribute_name="attribute_value"....more attributes>
One or more lines or text message or image
</marquee>
The <marquee> Tag Attributes
Following is the list of important attributes which can be used with <marquee> tag.
Attribute
Description
width
This specifies the width of the marquee. This can be a value like 10 or 20% etc.
height
This specifies the height of the marquee. This can be a value like 10 or 20% etc.
direction
This specifies the direction in which marquee should scroll. This can be a value like up, down, left or right.
behavior
This specifies the type of scrolling of the marquee. This can have a value like scroll, slide and alternate.
scrolldelay
This specifies how long to delay between each jump. This will have a value like 10 etc.
scrollamount
This specifies the speed of marquee text. This can have a value like 10 etc.
loop
This specifies how many times to loop. The default value is INFINITE, which means that the marquee loops endlessly.
bgcolor
This specifies background color in terms of color name or color hex value.
hspace
This specifies horizontal space around the marquee. This can be a value like 10 or 20% etc.
vspace
This specifies vertical space around the marquee. This can be a value like 10 or 20% etc.

Below are few examples to demonstrate the usage of marquee tag.
Examples - 1
<!DOCTYPE html>
<html>
<head>
<title>HTML marquee Tag</title>
</head>
<body>
<marquee>This is basic example of marquee</marquee>
</body>
</html>
This will produce the following result:
Examples - 2
<!DOCTYPE html>
<html>
<head>
<title>HTML marquee Tag</title>
</head>
<body>
<marquee width="50%">This example will take only 50% width</marquee>
</body>
</html>
This will produce the following result:
Examples - 3
<!DOCTYPE html>
<html>
<head>
<title>HTML marquee Tag</title>
</head>
<body>
<marquee direction="right">This text will scroll from left to right</marquee>
</body>
</html>
This will produce the following result:
Examples - 4
<!DOCTYPE html>
<html>
<head>
<title>HTML marquee Tag</title>
</head>
<body>
<marquee direction="up">This text will scroll from bottom to up</marquee>
</body>
</html>
This will produce the following result:


HTML – HEADER

We have learnt that a typical HTML document will have following structure:
Document declaration tag
<html>
<head>
Document header related tags
</head>
<body>
Document body related tags
</body>
</html>
This chapter will give a little more detail about header part which is represented by HTML <head> tag. The <head> tag is a container of various important tags like <title>, <meta>, <link>, <base>, <style>, <script>, and <noscript> tags.

The HTML <title> Tag
The HTML <title> tag is used for specifying the title of the HTML document. Following is an example to give a title to an HTML document:
<!DOCTYPE html>
<html>
<head>
<title>HTML Title Tag Example</title>
</head>
<body>
<p>Hello, World!</p>
</body>
</html>
This will produce the following result:
Hello, World!

The HTML <meta> Tag
The HTML <meta> tag is used to provide metadata about the HTML document which includes information about page expiry, page author, list of keywords, page description etc.
Following are few of the important usages of <meta> tag inside an HTML document:
<!DOCTYPE html>
<html>
<head>
<title>HTML Meta Tag Example</title>
<!-- Provide list of keywords -->
<meta name="keywords" content="C, C++, Java, PHP, Perl, Python">
<!-- Provide description of the page -->
<meta name="description" content="Simply Easy Learning by Tutorials Point">
<!-- Author information -->
<meta name="author" content="Tutorials Point">
<!-- Page content type -->
<meta http-equiv="content-type" content="text/html; charset=UTF-8">
<!-- Page refreshing delay -->
<meta http-equiv="refresh" content="30">
<!-- Page expiry -->
<meta http-equiv="expires" content="Wed, 21 June 2006 14:25:27 GMT">
<!-- Tag to tell robots not to index the content of a page -->
<meta name="robots" content="noindex, nofollow">
</head>
<body>
<p>Hello, World!</p>
</body>
</html
This will produce the following result:
Hello, World!

The HTML <base> Tag
The HTML <base> tag is used for specifying the base URL for all relative URLs in a page, which means all the other URLs will be concatenated into base URL while locating for the given item.
For example, all the given pages and images will be searched after prefixing the given URLs with base URL http://www.tutorialspoint.com/ directory:
<!DOCTYPE html>
<html>
<head>
<title>HTML Base Tag Example</title>
<base href="http://www.tutorialspoint.com/" />
</head>
<body>
<img src="/images/logo.png" alt="Logo Image"/>
<a href="/html/index.htm" title="HTML Tutorial"/>HTML Tutorial</a>
</body>
</html>
This will produce the following result:
But if you change base URL to something else, for example, if base URL is http://www.tutorialspoint.com/home then image and other given links will become like http://www.tutorialspoint.com/home/images/logo.png and http://www.tutorialspoint.com/home/html/index.htm









The HTML <link> Tag
The HTML <link> tag is used to specify relationships between the current document and external resource. Following is an example to link an external style sheet file available in css sub-directory within web root
<!DOCTYPE html>
<html>
<head>
<title>HTML link Tag Example</title>
<base href="http://www.tutorialspoint.com/" />
<link rel="stylesheet" type="text/css" href="/css/style.css">
</head>
<body>
<p>Hello, World!</p>
</body>
</html>
This will produce the following result:
Hello, World!


The HTML <style> Tag
The HTML <style> tag is used to specify style sheet for the current HTML document. Following is an example to define few style sheet rules inside <style> tag:

<!DOCTYPE html>
<html>
<head>
<title>HTML style Tag Example</title>
<base href="http://www.tutorialspoint.com/" />
<style type="text/css">
.myclass{
background-color: #aaa;
padding: 10px;
}
</style>
</head>
<body>
<p class="myclass">Hello, World!</p>
</body>
</html>

This will produce the following result:
Hello, World!
Note: To learn about how Cascading Style Sheet works, kindly check a separate tutorial available at http://www.tutorialspoint.com/css

The HTML <script> Tag
The HTML <script> tag is used to include either external script file or to define internal script for the HTML document. Following is an example where we are using JavaScript to define a simple JavaScript function:
<!DOCTYPE html>
<html>
<head>
<title>HTML script Tag Example</title>
<base href="http://www.tutorialspoint.com/" />
<script type="text/JavaScript">
function Hello(){
alert("Hello, World");
}
</script>
</head>
<body>
<input type="button" onclick="Hello();" name="ok" value="OK" />
</body>
</html>
This will produce the following result, where you can try to click on the given button:
Note: To learn about how JavaScript works, kindly check a separate tutorial available at: http://www.tutorialspoint.com/JavaScript




























UNIT-4

HTML – STYLE SHEET

Cascading Style Sheets (CSS) describe how documents are presented on screens, in print, or perhaps how they are pronounced. W3C has actively promoted the use of style sheets on the Web since the consortium was founded in 1994.
Cascading Style Sheets (CSS) provide easy and effective alternatives to specify various attributes for the HTML tags. Using CSS, you can specify a number of style properties for a given HTML element. Each property has a name and a value, separated by a colon (:). Each property declaration is separated by a semi-colon (;).
Example
First let's consider an example of HTML document which makes use of <font> tag and associated attributes to specify text color and font size:
<!DOCTYPE html>
<html>
<head>
<title>HTML CSS</title>
</head>
<body>
<p><font color="green" size="5">Hello, World!</font></p>
</body>
</html>
We can re-write above example with the help of Style Sheet as follows:
<!DOCTYPE html>
<html>
<head>
<title>HTML CSS</title>
</head>
<body>
<p style="color:green;font-size:24px;">Hello, World!</p>
</body>
</html>
This will produce the following result:
Hello, World!

You can use CSS in three ways in your HTML document:
External Style Sheet: Define style sheet rules in a separate .css file and then include that file in your HTML document using HTML <link> tag.
Internal Style Sheet: Define style sheet rules in header section of the HTML document using <style> tag.
Inline Style Sheet: Define style sheet rules directly along-with the HTML elements using style attribute.
Let's see all the three cases one by one with the help of suitable examples.

External Style Sheet
If you need to use your style sheet to various pages, then its always recommended to define a common style sheet in a separate file. A cascading style sheet file will have extension as .css and it will be included in HTML files using <link> tag.
Example
Consider we define a style sheet file style.css which has following rules:
.red{
color: red;
}
.thick{
font-size:20px;
}
.green{
color:green;
}
Here we defined three CSS rules which will be applicable to three different classes defined for the HTML tags. I suggest you should not bother about how these rules are being defined because you will learn them while studying CSS. Now let's make use of the above external CSS file in our following HTML document:
<!DOCTYPE html>
<html>
<head>
<title>HTML External CSS</title>
<link rel="stylesheet" type="text/css" href="/html/style.css">
</head>
<body>
<p class="red">This is red</p>
<p class="thick">This is thick</p>
<p class="green">This is green</p>
<p class="thick green">This is thick and green</p>
</body>
</html>
This will produce the following result:
This is red
This is thick
This is green
This is thick and green

Internal Style Sheet
If you want to apply Style Sheet rules to a single document only, then you can include those rules in header section of the HTML document using <style> tag.
Rules defined in internal style sheet overrides the rules defined in an external CSS file.
Example
Let's re-write above example once again, but here we will write style sheet rules in the same HTML document using <style> tag:
<!DOCTYPE html>
<html>
<head>
<title>HTML Internal CSS</title>
<style type="text/css">
.red{
color: red;
}
.thick{
font-size:20px;
}
.green{
color:green;
}
</style>
</head>
<body>
<p class="red">This is red</p>
<p class="thick">This is thick</p>
<p class="green">This is green</p>
<p class="thick green">This is thick and green</p>
</body>
</html>
This will produce the following result:
This is red
This is thick
This is green
This is thick and green

Inline Style Sheet
You can apply style sheet rules directly to any HTML element using style attribute of the relevant tag. This should be done only when you are interested to make a particular change in any HTML element only.
Rules defined inline with the element overrides the rules defined in an external CSS file as well as the rules defined in <style> element.
Example
Let's re-write above example once again, but here we will write style sheet rules along with the HTML elements using style attribute of those elements.
<!DOCTYPE html>
<html>
<head>
<title>HTML Inline CSS</title>
</head>
<body>
<p style="color:red;">This is red</p>
<p style="font-size:20px;">This is thick</p>
<p style="color:green;">This is green</p>
<p style="color:green;font-size:20px;">This is thick and green</p>
</body>
</html>
This will produce the following result:
This is red
This is thick
This is green
This is thick and green


HTML – LAYOUTS

A webpage layout is very important to give better look to your website. It takes considerable time to design a website's layout with great look and feel.
Now- a-days, all modern websites are using CSS and JavaScript based framework to come up with responsive and dynamic websites but you can create a good layout using simple HTML tables or division tags in combination with other formatting tags. This chapter will give you few examples on how to create a simple but working layout for your webpage using pure HTML and its attributes.
HTML Layout - Using Tables
The simplest and most popular way of creating layouts is using HTML <table> tag. These tables are arranged in columns and rows, so you can utilize these rows and columns in whatever way you like.
Example
For example, the following HTML layout example is achieved using a table with 3 rows and 2 columns but the header and footer column spans both columns using the colspan attribute:
<!DOCTYPE html>
<html>
<head>
<title>HTML Layout using Tables</title>
</head>
<body>
<table width="100%" border="0">
<tr>
<td colspan="2" bgcolor="#b5dcb3">
<h1>This is Web Page Main title</h1>
</td>
</tr>
<tr valign="top">
<td bgcolor="#aaa" width="50">
<b>Main Menu</b><br />
HTML<br />
PHP<br />
PERL...
</td>
<td bgcolor="#eee" width="100" height="200">
Technical and Managerial Tutorials
</td>
</tr>
<tr>
<td colspan="2" bgcolor="#b5dcb3">
<center>
Copyright © 2007 Tutorialspoint.com
</center>
</td>
</tr>
</table>
</body>
</html>
This will produce the following result:

This is Web Page Main title
Main           Menu HTML PHP PERL...
Technical and Managerial Tutorials
                                           Copyright © 2007 Tutorialspoint.com

Multiple Columns Layout - Using Tables
You can design your webpage to put your web content in multiple pages. You can keep your content in middle column and you can use left column to use menu and right column can be used to put advertisement or some other stuff. This layout will be very similar to what we have at our website tutorialspoint.com.
Example
Here is an example to create three column layout:
<!DOCTYPE html>
<html>
<head>
<title>Three Column HTML Layout</title>
</head>
<body>
<table width="100%" border="0">
<tr valign="top">
<td bgcolor="#aaa" width="20%">
<b>Main Menu</b><br />
HTML<br />
PHP<br />
PERL...
</td>
<td bgcolor="#b5dcb3" height="200" width="60%">
Technical and Managerial Tutorials
</td>
<td bgcolor="#aaa" width="20%">
<b>Right Menu</b><br />
HTML<br />
PHP<br />
PERL...
</td>
</tr>
<table>
</body>
</html>
This will produce the following result:

Main Menu
 HTML
PHP
PERL...
Technical and Managerial Tutorials
Right Menu HTML
 PHP
 PERL...
HTML Layouts - Using DIV, SPAN
The <div> element is a block level element used for grouping HTML elements. While the <div> tag is a block-level element, the HTML <span> element is used for grouping elements at an inline level.
Although we can achieve pretty nice layouts with HTML tables, but tables weren't really designed as a layout tool. Tables are more suited to presenting tabular data.
Note: This example makes use of Cascading Style Sheet (CSS), so before understanding this example you need to have a better understanding on how CSS works.
Example
Here we will try to achieve same result using <div> tag along with CSS, whatever you have achieved using <table> tag in previous example.
<!DOCTYPE html>
<html>
<head>
<title>HTML Layouts using DIV, SPAN</title>
</head>
<body>
<div style="width:100%">
<div style="background-color:#b5dcb3; width:100%">
<h1>This is Web Page Main title</h1>
</div>
<div style="background-color:#aaa; height:200px;width:100px;float:left;">
<div><b>Main Menu</b></div>
HTML<br />
PHP<br />
PERL...
</div>
<div style="background-color:#eee; height:200px;width:350px;float:left;">
<p>Technical and Managerial Tutorials</p>
</div>
<div style="background-color:#aaa; height:200px;width:100px;float:right;">
<div><b>Right Menu</b></div>
HTML<br />
PHP<br />
PERL...
</div>
<div style="background-color:#b5dcb3;clear:both">
<center>
Copyright © 2007 Tutorialspoint.com
</center>
</div>
</div>
</body>
</html>
Posted by at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)